Quality Horse Stall Products that DON'T RUST!

Armour manufactures high quality aluminum horse stall components that do not rust! A full line of horse stalls and accessories such as sliding stall doors, gossip gates, stall fronts, partitions, window grilles, double-dutch doors, shutters, ventilation panels and end barn doors are available in both standard or custom sizes and arrive with all the necessary hardware for installation.

Armour sliding stall barn doors and gossip horse gate's feature: heavy-gauge aluminum, concealed welds, reinforced header channels, counter-sunk screw placements, aluminum channel surrounded edges, and mitered cut corners. Armour offers a variety of sliding barn door and horse gate fascias. Lumber designs range from the time honored cross-buck “x” to the traditional tongue and groove. Armour horse stall doors and barn gate products arrive assembled with all the following hardware and fasteners for lumber installations. The sliding door hardware kit includes: rounded track, ball-bearing trolleys, aluminum door stops, slide-bolt latch and heavy-duty stay roller. Barn gate hardware kit includes: two heavy-duty hinges and a slide-bolt latch.

Armour sliding doors, end barn doors, and shutters all arrive with heavy-duty rounded track and ball-bearing trolleys as well. Its round shape enables closer contact with ball-bearing trolleys for a smooth gliding and self aligning stall door. The self-cleaning overhead door track maintains continued smooth opening while preventing pests from nesting. Each sliding barn product includes a track mounting fastener pack for lumber installations. Sliding stall doors, end barn doors, and shutters also include, Armour manufactured, aluminum door stops. The stops prevent doors from traveling beyond the round track. The receiver stop is used in conjunction with zinc plated latch plates which assist in locking the stall product. A neoprene, wall mount, adjustable stay roller is provided to prevent the door from being pushed into the aisle while opening. Feel free to request our free latch preparation at time of ordering.

Armour horse stalls may require no rust aluminum stall front, divider partitions, and window grilles for adequate or maximum ventilation. Stall hardware includes heavy gauge aluminum round tubes with clean welded connections. All Armour horse stall products are handmade and professionally crafted by skilled barn building tradesmen. Custom sizes are not a problem when renovation or updating requires and our extensive standard sized items are sure to accommodate any newly built horse barn facility. Armour will manufacture stall grills to the nearest 1/8" in length at no additional cost.

Armour Shutters and double dutch doors are available in the time honored cross-buck "x", traditional tongue & groove or you can create your own design from our barn art images. Farm logos may be precision carved and installed as well. The barn shutters and Dutch doors both feature mitered-cut (picture framed) corners and aluminum channel surroundings. Channel edges prevent horses from chewing and add an elegant appearance. All interior lumber panels arrive ready to stain, or paint, to match any barn decor. Shutters are available in both, single or double-swing with various standard sizes to choose. Armour can also accommodate custom sizes when necessary.

Armour’s Airflow Vent-Panels or Add-a-Vent grilles allow adequate airflow to stifled areas of the horse stall. These small panels feature the same heavy-gauge aluminum, clean welded connections, and one, two or three inch between bar spacing (pricing varies). Airflow Vent-Panels are manufactured to replace existing lumber for barn door or stall renovation. And Add-a-Vent grilles are installed during the horse stall building process.

As mentioned previously Armour’s End Door Superstructures are assembled from the highest quality aluminum extrusions and arrive with quality rounded door tracks, ball bearing trolleys, aluminum miter stops, galvanized handles and adjustable stay rollers. The manufacturing procedures performed at Armour enable stable owners to install the barn door frame without cranes or multi-man crews because only the frame is installed first. Once positioned, leveled, and plumb, the Superstructure (frame) can then be filled with any 2x6 lumber. Convenient cap covers allow the lumber to be replaced in the future if necessary, which makes the product completely reusable, year after year, after year! These barn doors will add elegance and a consistent appearance throughout the stable when used in conjunction with other Armour components.

Armour does not build barns or stables, but has designed and provided quality horse stalls, barn doors, and stall components to customers throughout the country from Florida to Vermont to California and all points along the way. Among our clients are barn builders, equestrian centers, boarding stables, and leisure farms. Please call 1-800-876-7706 for additional horse stall information or assistance during your horse barn planning stages.

Standing, Rearing or Jumping Horse Barn Doors

Armour has increased its door selection again! Introducing its newest products the Standing, Rearing and Jumping Horse Sliding Stall Doors, they are aptly named due to the horses’ position on each door. Armour manufactures any of these designs as sliding doors, hinged gates, or shutters. The unique lumber silhouettes are mounted onto lumber panels and inserted into one of Armour’s product frames bringing a traditional yet contemporary design to any barn. Logos arrive unpainted and ready for your two toned painting or staining. The Standing, Rearing or Jumping horse logos can be combined with any of Armour’s specialty door tops such as The Herringbone.

The stylish Herringbone top is equal in strength and materials as a standard bar top door with its 1” round bar and 1/8” non-rusting aluminum are welded to form a strong and unmarred appearance. These doors are designed for discriminating horse owners who demand something unique, stylish, and fashionable in their 3 or 30 stall barn. Unlike anything on the market, Armour’s new Herringbone look renders a refreshing approach to the designer stall fronts without the “stylish” cost.

If you don’t see a top and bottom door design that you love, inquire and we can make one for you without the custom cost!

Whether you’re building a barn, traditional or contemporary in style, Armour Stall Doors are sure to add value with their unique designs and aluminum non rusting feature. Armour products are sure to suite the full spectrum of horse enthusiasts to multi-barn builders. The no rust advantage of aluminum means no continual touch up painting on stalls and encourages more time spent with the ones you love, your horses!

Whichever style you select, Armour products arrive fully assembled, no rattling pieces, with the best 1/8” aluminum, 1” round tubes, 8’0” round track, heavy duty ball-bearing trolleys, aluminum stops, slide-bolt latch, and heavy-duty adjustable stay-roller. The Standing, Rearing or Jumping Horse Stall Door with a straight or Herringbone Top arrives complete with hardware package. Once it arrives, simply unpack and hang the door. It take approximately 16 fasteners to hang the hardware and door!

Please call 800-876-7706 and discuss, with one of our product specialists, your many associated options: stall fronts, dividing partitions, double Dutch doors, shutters or end barn doors. Or you can view our website at http://www.armourgates.com/index.html for more details.

Economy Dutch Doors for Barns

A conservative way to achieve closing down your barn for the winter and opening it back up, while increasing air mobility, for the spring and summer months. The economy model Dutch Door with it’s traditional cross buck, x, design is available in one panel, Dutch, or two panels, double Dutch. Doors are available in standard 3’11-1/2” widths and heights of 7’ and 8’ and smaller custom sizes are available. The panels can be painted or stained to match your barn decor, and can also be ordered with custom logos, horse silhouettes or your farm/horse name engraved.

These solidly built doors provide an economical means of installing a strong durable Dutch door with a "no frills" approach because the aluminum trim featured on Armour’s standard Dutch doors model CBDD2 has been excluded, therefore reducing your cost. Made of the same materials as its aluminum clad cousin, the doors are offered with two 6" tee hinges, slide-bolt latch and fasteners for lumber installation. All hardware is zinc plated for durability. One piece of aluminum crib trim can be added to the bottom door’s top wood edge for chewing protection.

Armour manufactures a multitude of sliding barn doors and hinged gates with many top different top features to appeal to the full spectrum of equine enthusiast. In addition to Armour's door product line, stall fronts, dividers, end doors, barn shutters and ventilation items are also available. Browse online or view our online catalog here. Don’t see what you’re looking for? Give one of our product specialists a call and see what Armour can do for your barn! 800-876-7706

New Flash-panel Crossbuck Sliding Barn Door

Armour adds, yet another, design to their list of over 85 different stall door styles. Add some FLASH to your stalls without “custom” cost AND without losing the traditional appearance! Armour is now offering aluminum panels added to any crossbuck style sliding door or hinged Dutch door. These aluminum panels add flare to an otherwise traditional stall door and can be removed if you decide you prefer a less metallic appearance in years to come. Flash-panels can be added to the bottom of any fold-down, lift-out, or gossip style top feature sliding door OR any of Armour’s half or double Dutch doors. All aluminum used is 1/8” and cut precisely to fit into the negative “X” areas. Aluminum flash panels are backed with ¾” plywood and the total door thickness is almost 2”.

All ready have an Armour Crossbuck Door? Want to add some FLASH? No problem, just give us a call and we can ship four Flash-panels to you to enhance your existing Armour doors.

Armour Sliding Doors always arrive All Aluminum, fully assembled, no rattling pieces, with the best 8’0” round track, heavy duty ball-bearing trolleys, aluminum stops, slide-bolt latch, and heavy-duty adjustable stay-roller.

Please call 800-876-7706 and discuss stall front, Dutch door, shutter, partition or end door options with one of our knowledgeable product specialists or view our website at http://www.armourgates.com/ for details.

Armour Gates - Aluminum Horse Stalls

ARMOUR - a quality horse stall component manufacturer.

Armour manufactures high quality horse stall components of aluminum which of course, does not rust! Armour provides a full line of stall components such as stall fronts, sliding doors, sliding stall doors, hinged gossip gates, half gates, Dutch doors, stall partitions, stall dividers, window grills, end barn doors and shutters.

Armour Sliding Stall Door and Gossip Gate features are: heavy-gauge aluminum, concealed welds, reinforced header channels, counter-sunk screw placements, all lumber edges are surrounded with aluminum channel, and mitered cut corners. Armour offers a variety of door and gate fascias and custom logos on doors are available. All door hardware and lumber are included.

Armour Stall Fronts, Divider Partitions, and Window Grills are also made with heavy gauge aluminum and feature our concealed welded connections. All Armour products are handmade and professionally crafted by skilled tradesmen. Custom sizes are not a problem when renovation or updating requires. Check out over 77 examples of installed product on our product portfolio page, no job is too small or large. Feel free to contact us and let us quote your project today! We strive to provide customers with the highest quality component, every time!

Armour's shutters and double-Dutch doors both feature mitered cut corners and aluminum channel surroundings. Both products are available in single or double swing and arrive with the installation hardware. Whether renovation or building new, give us a call, we can find a solution for you!

Armour does not build barns or stables, but has designed and provided quality stall components for customers throughout the country from Florida to Vermont to California and many points along the way. Among our clients are barn builders, equestrian centers, boarding stables, and farms. Please call 1-800-876-7706 or contact us for additional information or assistance during your planning stages. We look forward to talking with you!

Armour - a quality AND affordable horse stall manufacturer!

Breezewood Stall Door & Stall Front Panels

An inexpensive way to provide additional ventilation to your horse stalls while obtaining a fresh new interior look!

Armour’s newest innovation, Breezewood ventilated lumber panels in sliding doors, half gates, OR a whole designer stall front, are now available! The 1-1/2” thick Panels can be ordered in a variety of uniquely made patterns: The Circular, XL, The Gem, or The Baton. Breezewood panels can be custom made in accordance with your own design or size requirements. The panels can be painted or stained to match your decor, and can also be ordered with a solid back panel if ventilation is not necessary.

The Circular’s bold round design is a departure from the traditional straight line approach found on most barns or stables providing ample ventilation for the stall door or stall front designated.

The XL is a modern replicate of our Traditional Crossbuck design taken a step higher. This design is in keeping with the tried and true pattern of old but additionally provides greater ventilation to the stall area as is always appreciated by the occupants.

A Gem or diamond theme is created by the unique placements of our finished openings for this attractive door front and is carried out equally on all four sides. Airflow is maximized as is evidenced by the length of openings as well as their twenty eight separate locations.

Our Baton Panel is produced conservatism in mind since it blends nicely with the vertical picket placements of our sliding doors and stall grilles and does not overpower the frontage. A touch of class with major increased airflow benefits .

Armour’s Breezewood Sliding Stall Doors have 1” round tubes and 1/8” non-rusting aluminum framing which is welded to form a strong and unmarred appearance. Doors are reinforced with an extra length of square tubing down each side for added rigidity and strength. All doors arrive assembled with no rattling pieces, with the best 8’0” round track, heavy duty ball-bearing trolleys, aluminum stops, sliding-bolt latch, and heavy-duty adjustable stay-roller, and fasteners for lumber installations. Any of the new Breezewood designs include the hardware necessary for installation, click here for pricing and ordering.

The new Breezewood Half Gates are the same unique lumber panels, your choice of The Gem, Circular, XL or Baton, wrapped on all four exterior sides with non rusting aluminum trim. The interior stall gate, assembled with hinges, latch and fasteners for lumber installation is available now at Armour Companies.

If a Breezewood designed front is your desire, we are happy to review your stall drawings and provide a custom stall front for you. Please forward drawings via email to info@armourgates.com .

Please call 800-876-7706 and discuss adding combination design and ventilation to your barn today. Or check us out on the web at http://www.armourgates.com/

Herringbone Stall Door

Armour Gates introduces its newest sliding door the Herringbone which is aptly named due to the obliquely placed, opposing picket patterns, in the upper area of the door, extending vertically on each side. The Herringbone is a departure from Armour’s standard straight bar top and lends itself well with barn decors whether traditional or contemporary in style. The stylish top is made from the same non rusting aluminum materials as used in other Armour products. The 1” diameter and 1/8” round tube is secured using concealed welding procedures.

The Herringbone top can be ordered with any or Armour’s standard door bottom panels such as Crossbuck, Vertical or Horizontal Tongue and Groove, Coolbreeze with or without scuff panels. Other door top options can be featured with the Herringbone top such as, the Fold-down or Lift-out Panel.

Whichever style you select, all Armour Aluminum Sliding Doors arrive fully assembled, no rattling pieces, with the best 8’0” round track, heavy duty ball-bearing trolleys, aluminum stops, slide-bolt latch, and heavy-duty adjustable stay-roller.

The dramatic new styling of the Herringbone top provides another refreshing option for a unique, stylish, and fashionable stable interior without undue cost. http://www.armourgates.com/slidingdoors.html#cbbs

Please call 800-876-7706 and discuss, with one of our product specialists, your many associated options: sliding stall doors, hinged gates, shutters, stall fronts, Dutch doors, shutter, dividing and grilled partitions or end barn doors. Or you can view our website at http://www.armourgates.com/ for details.